Step Two - Hang Track (First Fix)
Horizontal Hang Tracks are required to ensure all of the Vertical Wall Standards are perfectly level.
Available in 24", 40" and 80" lengths. If necessary, Hang Tracks can be cut to size using a hack saw.
Order 2876 or 2877 Fixings Kits to attach the Hang Tracks to the wall. You will also need these fixings to secure the Wall Standards.
End Caps (203) are required to cover the ends of each shelf;
For 12"/30.5cm deep SuperSlide shelving you will need 10 small end caps per shelf
For 16"/40.6cm deep SuperSlide shelving you will need 12 small end caps per shelf
Deck Caps (114) are ONLY required if cutting the smaller 'deck' wires out around an obstacle. These caps do NOT fit onto the ends of the shelves.
.jpg)
.jpg)
.jpg)
.jpg)
ShelfTrack Hardware Information
 | |
 |  |