1162 - Shelf Support Bracket, 25.4cm / 10inch position (also for use with 9inch shelving)

A key component of our Fixed Mount system.

• Supports front lip of 9in & 10in deep shelving AND 10in hang bar positions. 
• Use 1 bracket every 36in along the shelf's length and at each 'open end' of shelf
• If supporting more than 3 shelves in a stack you could use a 1009 Shelf Support Pole instead
• If you have side walls to attach to please use 942/974 Wall Brackets
• Not for use with ShelfTrack system
• Note that the physical length of this bracket is 30.5cm (12in) long
• Supplied with one 1in screw and one 1in rawl plug
• Material: Epoxy coated steel

These 10in position shelf brackets are for use with the following:

• 9in Linen shelving
• 10in Shelf & Rod shelving
• 16in Shelf & Rod shelving with hang rod 10in from the back wall
• 12in & 16in SuperSlide shelving if using hang bar at 10in position

Please note that the length of the actual bracket is NOT 10in (25.4cm).

As the bracket sits at an angle, it is longer than the shelf depth that the bracket is used to support. Therefore if ordering any replacements or additional supports, please double check that you order the bracket based on the position and not the physical length of the bracket.

A 1162 (10in / 9in position) bracket is actually 12in (30.5cm) long.