71066 - 12" Deep Shelf & Rod Corner Kit

ClosetMaid's^® Shelf & Rod Corner Shelf Kit is designed to use with Shelf & Rod wire shelving.
By installing in the corner with shelves connecting, this shelf creates a usable corner so that hangers continue around corner.
 

• Shelving sold separately
• Corner shelf piece comes complete with the Wall Clips, Joiner Plates and Shelf Support Brackets needed for installation
• The Corner Shelf Kit can ONLY be used with 12" deep Shelf & Rod shelving (7300)
• The corner shelf is 2" (5cm) high x 18" (45.72) wide x 18" (45.72) deep.
• Not for use with ShelfTrack fixing system
• Material: Vinyl coated steel
• All shelving SCS^® Certified for minimum of 91% recycled content

When using corner shelf kits, please remember that they do take up quite a bit of wall space, and you won't want to make the adjoining shelves much shorter than 24" (61cm) as they will be difficult to install and you must also bear in mind that once garments are on their hangers they are approximately 22" wide and therefore, if you have anything less than 22" left once the corner kit is in place you will not gain any hanging space.