Custom closet design over bulk head.
This design uses 40.6cm (16”) deep All Purpose shelving with SuperSlide hang bars with our Fixed Mount system.
Refer to the PDF drawings sent with our e-mail of 29th July.
Page One shows a view of the left hand side wall (114cm wide, 230cm high, 137cm high above bulkhead).
- Across this wall there is a full width shelf for storing flat and folded items.
- Attached to the shelf is a 56cm (22”) wide hang bar for storing short garments.
- The hang bar joins up to a corner bar which will allow you to move & store garments around the corner without interruption.
- You could use the top of the bulkhead to store boxes, bags, shoes etc.
- Please note that I have assumed the depth of the return wall will be deep enough to fix the shelf onto but if this isn’t the case then I will need to update the shelf fixings. Could you please let me know the width of the return wall at the left end of this wall?
Page Three shows a view of the back wall (184.9cm wide, 230cm high, 137cm high above bulkhead).
- Along this wall there is a 140cm (55”) wide top shelf which will butt up to the shelf on the left wall.
- Attached to the shelf is a 127cm (50”) wide hang bar for storing short – medium length garments.
- This hang bar continues on from the above mentioned corner bar.
- To the right of the bulkhead there are four 71cm (28”) wide shoe shelves which will each hold 3 pairs of shoes.
Note that shoe shelves use 30.5cm (12”) deep shelving.
Pages Five - Eight shows plan and dimension pages of your closet. Please check these for any errors.
Total cost to supply & deliver the parts needed to create this layout (to any UK mainland address exc. Scottish Highlands) inc. VAT: £188.86
